air cooler distributors in Indore
By on August 26th, 2020 in Air Coolers

Tips From Top Air Cooler Distributors in Indore For Cleaning Cooler Tanks

Is the hot and dry weather draining out your energy? Then getting a portable evaporative cooler would serve you well. It will be very effective at cooling down your room temperature to a comfortable range.

However, don’t get too comfy, and neglect is maintaining the device. If you fail to clean the air cooler regularly, then it will develop mold and bad odour. To avoid such situations, here is a guide on how to clean your portable evaporative cooler.

Clean The Water Tank

You need to change the water in your portable evaporative cooler on a routine basis. Stagnant water, especially in hot and humid climates, forms an excellent breeding ground for bacteria. This will release an unpleasant odour into the air and might also affect your health.

The old water needs to be poured out and replaced with freshwater to maintain proper hygiene. It would be even better if you could sanitize the water tank as well. Ideally, this process should be repeated every three days or so.

Here is a step by step guide provided by top air cooler distributors in Indore to help you properly clean the water tank.

Step 1: Remove the Cooling Pads and all the Panels

Before cleaning the water tank, you need to remove all the cooling pads and panels. But first, don’t forget to unplug the device and turn off the water supply.

Step 2: Drain Out the Old Water

Now it is time to drain out the old water. See if the water tank is detachable. If so, detach it and throw out the water. The manufacturer might also put in a drain plug. In that case, open it and wait till all the water drains out.

Step 3: Clean the Inside of the Cooler

Sometimes debris might get stuck inside the water tank. This can create a blockage causing the unclean water to cycle through it. So it is always a good idea to clean the insides of the cooler. A soft cloth or sponge will be ideal for the task.

Step 4: Use Vinegar to Soak the Water Tank

Make a 50/50 solution of water and vinegar. Use it to fill up the tank and leave it for an hour. An alternative method would be using a mild soap and warm water to rinse the tank.

Step 5: Lastly, Scrub it Clean

Finally, it is time to give the tank a good scrubbing. Use a brush or a piece of cloth for the job. Once done, rinse the tank thoroughly with clean water

For more cleaning tips you can ask an air cooler distributors in Indore so you always feel a better and fresh cooling experience inside your home or office. Enjoy the cooling from your air cooler!

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed

Menu